M-Audio Nova Microphone
This large capsule cardioid condenser microphone puts sound recording to another level of quality. Get what the pros use.
Ulteriori informazioniClose
Panoramica
This new Nova cardioid redefines the entry-level price point for quality studio condenser microphones. The 1.1” evaporated gold diaphragm mounted in a solid brass capsule ensures recordings that are faithful to the source, and the Class A solid state electronics are engineered for low noise, distortion and coloration.
Such a microphone requires a dedicated preamp and phantom power to work (this is what you get with many popular audio interfaces, such as the M-Audio FW 410 or the M-Audio Mobile Pre). It can’t be plugged directly to the line-in of any Mac.
Features
large capsule cardioid condenser
1.1” evaporated gold diaphragm
solid brass capsule
Class A solid state electronics
+/-1dB tolerance across entire frequency range
20Hz-18kHz frequency response
What’s in the box
Nova mic
hard mount
soft case
XLR cable
Specifications
type: large diaphragm condenser, gold evaporated
polar pattern: cardioid
frequency response: 20 Hz-18 kHz
sensitivity: 16 mV/Pa (-36 dBV)
max. SPL for 0.5% THD: 128 dB
equivalent noise level: 14 dB A weighted
output impedance: 200 Ohm
recommended load impedance: > 1,000 Ohm
preamp topology: class A FET preamp
power requirement: 48 V phantom power
connector: 3-pin male XLR
grille and body: wire mesh grille and body, all brass
finishing: silver nickel plating
dimensions/weight: 19 x 5 cm - 0.65 kg
Warranty
1-year warranty
Such a microphone requires a dedicated preamp and phantom power to work (this is what you get with many popular audio interfaces, such as the M-Audio FW 410 or the M-Audio Mobile Pre). It can’t be plugged directly to the line-in of any Mac.
Features
large capsule cardioid condenser
1.1” evaporated gold diaphragm
solid brass capsule
Class A solid state electronics
+/-1dB tolerance across entire frequency range
20Hz-18kHz frequency response
What’s in the box
Nova mic
hard mount
soft case
XLR cable
Specifications
type: large diaphragm condenser, gold evaporated
polar pattern: cardioid
frequency response: 20 Hz-18 kHz
sensitivity: 16 mV/Pa (-36 dBV)
max. SPL for 0.5% THD: 128 dB
equivalent noise level: 14 dB A weighted
output impedance: 200 Ohm
recommended load impedance: > 1,000 Ohm
preamp topology: class A FET preamp
power requirement: 48 V phantom power
connector: 3-pin male XLR
grille and body: wire mesh grille and body, all brass
finishing: silver nickel plating
dimensions/weight: 19 x 5 cm - 0.65 kg
Warranty
1-year warranty